Lug Nut Covers for Method MR701/MR703 Wheels (Transit AWD)
US$59.95
Badass LUG NUT COVERS for Method MR701/MR703 wheels (fits AWD Ford Transit with factory lug nuts only).
Quantity: 24-Pack (fits 4 wheels).
With:
Without:
Installation
To install, simply push the lug nut covers on the lugs. The interference fit between the covers and the lugs holds them firmly in place.
Removal
To remove, simply pull on the lug nut covers using pliers (apply gentle pressure and protect the surface to prevent damage). Keep in mind that pliers are required to get a sufficient grip to pull them out, so keep some with your spare tire tools at all time. Also remember to take them off before having your tires changed at the dealer!
If you’re really into tools, you should know that lug nut cover puller are a thing!
Lug Nut Cover Puller
Compatibility
These lug nut covers are compatible with:
- Wheels:
- Method MR701 for AWD Ford Transit (Tire Rack | Our Review)
- Method MR703 for AWD Ford Transit (Tire Rack | Our Review)
- Lug Nuts:
- Factory lug nuts only (reuse lug nuts that came with the Transit).
Specifications
- Manufacturing: 3D Printed.
- Material: Polycarbonate/PETG blend.
Alternatives
Lug Nut Covers
A more basic, but definitely cheaper option. It’s been reported that they don’t fit too well on the rear wheels because the lug nuts protrude too much.
Shipping
- Ships From: British Columbia, Canada.
- Carrier: Canada Post / USPS.
- Cost: Actual carrier shipping rate calculated at checkout. You can combine other items from our Store to save on shipping.
Warranty, Returns & Refund
Warranty: If there is an issue or manufacturing defect, we’ll be happy to send you another one free of charge! 🙂
Returns & Refund: You are responsible of shipping the product back to us (including the shipping fees associated with it) for the following reasons:
- Ordered by mistake or if you changed your mind.
- Incompatibility (please check “Compatibility” section).
Digital Download (.STL File)
Got a 3D printer at home? Great! Save time and money by 3D printing it yourself:
ABOUT THIS PRODUCT
Do It Yourself.
We couldn’t find lug nut covers we liked, so we made them.
This is an homemade product.
A full wheel set (4 wheels = 24 covers) takes over 6 hours of print time. This is not a mass-produced product. This is a crafted, hand-made product.
Low Volume.
We created this product for our own needs, to make just a few units. There is no way for us to ramp up the production and lower the price, unless we take it to injection molding manufacturing but that’s a whole another level we’re not considering at the moment.
Lug Nut Covers for Method MR701/MR703 Wheels (Transit AWD)
Reviews
There are no reviews yet