Ford Transit Upfitter Switch Guard/Cover (2020+)
US$39.95
This Upfitter Auxiliary Switch Guard prevents humans and animals from accidentally flipping the switches and protects them from damage. Installs in seconds with pre-installed 3M VHB tape. Fits the Ford Transit 2020 to present.
The Transit Upfitter Auxiliary Switches are located between the passenger/driver seat, and they’re very easy to catch and accidentally turn ON/OFF. We constantly bump them with our knee when going from the front cabin to the living area in our van. It’s also a common complaint from people with dogs.
Our Upfitter Auxiliary Switch Guard prevents from accidentally flipping the switches and protects them from damage (notably when rotating the passenger swivel seat):
Our Upfitter Switch Cover is reversible, you’ve got a few options:
1. Recessed pads facing down:
2. Recessed pads facing up:
3. Use a P-Touch with 1/2″ (12mm) tape to add your own text:
Installation
The Guard is attached with 3M VHB Tape (included and pre-installed). Clean the surface with Isopropyl alcohol, peel-off the release liner and apply pressure for 5-10 seconds:
Compatibility
Fits Ford Transit years 2020 to present.
The mating surface is slightly curved on previous Transit years (2015-2019) and the cover unfortunately doesn’t fit.
Specifications
- Dimensions: 4.2in x 2.4in (106mm x 60mm).
- Manufacturing: 3D Printed.
- Material: Blend of Polycarbonate (50%), PETG (45%) & others (5%).
- Temperature Resistance: Up to 230F (110°C).
- Compatibility: Ford Transit 2020 to present.
- The contact surface is curved on pre-2020 Transit and therefore the guard won’t fit.
Shipping
- Ships From: British Columbia, Canada.
- Carrier: Canada Post / USPS.
- Cost: Actual carrier shipping rate calculated at checkout. You can combine other items from our Store to save on shipping.
wARRANTY, rETURNs & Refund
Warranty: If there is an issue or manufacturing defect, we’ll be happy to send you another one free of charge! 🙂
Returns & Refund: You are responsible of shipping the product back to us (including the shipping fees associated with it) for the following reasons:
- Ordered by mistake or if you changed your mind.
- Incompatibility (only fits Ford Transit 2020 to present).
ABOUT THIS PRODUCT
Do It Yourself.
We couldn’t find an Upfitter Switch Guard for the Ford Transit, so we made one.
This is an homemade product.
Each guard is individually 3D printed, takes close to 1 hour to complete and requires some manual labor. This is not a mass-produced product. This is a crafted, hand-made product.
Low Volume.
We created this product for our own needs, to make just a few units. There is no way for us to ramp up the production and lower the price, unless we take it to injection molding manufacturing but that’s a whole another level we’re not considering at the moment.
16 reviews for Ford Transit Upfitter Switch Guard/Cover (2020+)
| 5 star | 93% | |
| 4 star | 6% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Customer Images
The auxiliary switch cover is absolutely perfect and now there are no worries about accidentally turning lights on or damaging switches! Thank you Isabelle and Antoine for all your inspiration and resources!
Good to hear, thank you!!
Looks great and will protect the switches.
I installed on a 2008 f450. Switches are low on the dash and many times the dog, travel baggage, or reaching across to the pass. floorboard, etc. caused the switches too engage accidentally.
This is a great fix for any Super Duty with upfitter switches below the radio. Plus, with the ability to label, I can select the correct switch on the first attempt
I’m slightly modifying and painting mine. I will send pics soon.
Didn’t know it would work on a F450!
Can’t wait to see the photos 🙂
Switch Guard is a perfect addition. Many thanks to Far Out Ride for providing the guidance for the electrical connection to the switches. My Ford dealership didn’t know how it was done!
Well made. My van is a 2019. The only difference is that the face through which the switches protrude is slightly curved. A little work with a dremel tool and the fit is fine.
Glad you got it working on the 2019, nice work!
Perfect !!
The fit is perfect and functions as described, the only thing I would improve is smoothing out the finish. It has a very 3D printed look to the finish.
Installed and it looks great.
Thanks again, just what was needed to keep the dogs from turning on the lights!