Our Ford Transit came with the optional Front & Rear Vinyl Floor Covering (Option Code 16E), which includes a cargo liner (backed with denim), slider door scuff plate, rear door sill plate, and rear wheelhouse covers. As it turns out we’re glad our van had this option, because it protected our investment until we were finally ready to start our camper conversion. But the time has come to move on and to remove the factory floor covering!
Time
1 HOUR
Cost
$0
Weight Saving
~50 lbs
Material
N/A
Tools
- Flat head screwdriver.
- M5.5 Hex socket drive.
- M6 Hex socket drive.
Disclosure: This post contains affiliate links, which means that if you click a product link and buy anything from the merchant (Amazon, eBay, etc.) we will receive a commission fee. The price you pay remains the same, affiliate link or not.
How To Remove The Factory Floor
1. Remove the Rear door sill plate
1.1. Use a small flat screwdriver and gently pry the 5 screw covers off:
1.2. Remove the 5 screws with a M6 HEX socket:
1.3. The rear sill plate can now come off!
The Rear Door Sill Plate OEM part number is CK4Z-6140374-AA (MSRP $151.80). You can get it aftermarket for cheaper:
2. Remove the Slider door scuff plate
2.1. Similarly, pry the 4 screw covers off and remove the 4 screws using a M5.5 HEX socket. Remove the 2 push-pins as well:
2.2. Pull up hard to disengage the push-pins (underneath) and remove the scuff plate:
2.3. Success!
The Slider Door Scuff Plate OEM part number is CK4Z-6113228-AG (MSRP $292.43). You can get it aftermarket for cheaper:
3. Remove the Cargo Liner
3.1. The cargo liner has a few cutouts in the denim, which seem to be designed so that the liner can be folded over itself:
3.2. The cargo liner is surprisingly heavy (50lbs guesstimate) and hard to grasp, it’s a 2 person job (ideally):
The OEM cargo liner isn’t that great with its denim backing… we like the BedRug VanTred much better:
4. Remove the wheelhouse covers (as required)
The wheelhouse covers hold with 2 push-pins, they’re very straightforward to remove! Simply remove the push-pins and the wheelhouse cover is free to go (the cargo liner should be gone at this point, we forgot to take a photo at the right moment):
The Wheelhouse Cover OEM part number is CK4Z-16A550-GC (MSRP $65 each side):
5. Final Result
We did it!
Next…
By now there’s a pretty good chance that your next step is to install a new floor in your van!
Inspiration…
This book will either make you feel like your existence is insignificant, or make you feel like you can achieve the impossible. The latter is the better!