Lagun Table Mount Router Template
Router template to make a DIY Lagun table mount out of hardwood plywood (same as our aluminum Lagun Table Mount). To be installed on the Ford Transit B-Pillar and only compatible with the Sliver (Slim) Lagun bracket.
This download includes the .stl file for 3D printing.
Controls
×- Rotate with the left mouse button.
- Zoom with the scroll button.
- Adjust camera position with the right mouse button.
- Double-click to enter the fullscreen mode.
- On mobile devices swipe to rotate.
- On mobile devices pinch two fingers together or apart to adjust zoom.
- On mobile devices 3 finger horizontal swipe performs panning.
- On mobile devices 3 finger horizontal swipe performs panning.
PLA
0.6mm
0.35mm
2h
Get the Builder’s Package and log in to unlock this download (and more)! 🙂
How It Works:
- 3D Print.
- Place on hardwood plywood (min thickness 3/8″). Gently tap for the pins to grip into the wood and to mark the center of each hole.
- Trim. Use a flush-trim router bit.
- Drill holes. 11/32″ for 3 holes common with the Lagun’s bracket. 1/4″ for 2 holes common with the Transit’s B-Pillar (driver side: 11/32″). The center of each hole was marked at step 2, easy!
- Finish. Color and finish of your choice.
- Install. We’ve got you covered below:
Read the full story:
Be the first to review “Lagun Table Mount Router Template” Cancel reply
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Reviews
There are no reviews yet.