Victron SmartShunt Enclosure/Cover (Protective Case)
US$24.99
This SmartShunt enclosure/cover protects against accidental short circuit and physical damage. Designed specifically for the 500A/50mV Victron Smartshunt (without physical display) for a snug fit and optimal protection. Accepts wire of any gauge (AWG) and coming out from the side or back of the shunt.
Installation
Enclosure
Remove the mounting screws and the wires/connectors from the shunt. Slide down the enclosure over the shunt:
Install the mounting screws and connect the wires/connectors to the shunt:
Cover
The cover uses friction-fit over the two M10 screws to stay in place:
To install the cover, simply slide it over the two M10 screws:
Compatibility
This enclosure/cover is compatible with the following battery monitors:
- Victron SmartShunt IP21 500A (non-waterproof).
- Victron SmartShunt IP65 500A (waterproof).
Specifications
- Installed Dimensions: 4.75in x 2.25in x 2.0in (1120mm x 57mm x 50mm).
- Manufacturing: 3D Printed.
- Material: Polycarbonate.
- Temperature Resistance: Up to 250F (120°C), exceeds marine wire insulation rating.
- Included: Enclosure (base) and cover (top).
Shipping
- Ships From: British Columbia, Canada.
- Carrier: Canada Post / USPS.
- Cost: Actual carrier shipping rate calculated at checkout. You can combine other items from our Store to save on shipping.
wARRANTY, rETURNs & Refund
Warranty: If there is an issue with your enclosure (manufacturing defect), we’ll be happy to send you another one free of charge! 🙂
Returns & Refund: If you ordered the wrong enclosure (please check “Compatibility” section above before ordering!) or changed your mind, we can make a refund providing the enclosure is not damaged (no scratches, no cosmetic wear). You are responsible of shipping the product back to us (including the shipping fees associated with it).
Inspiration & Idea
Exposed components (shunt, battery terminals, breakers, etc.) in our campervan make us feel a bit uncomfortable due to the risk of short circuit. Here’s why…
Before installing the electrical system in our new van conversion, we are slowly working on designing and making enclosures and covers for the components we plan to use:
It’s still a work in progress at the time of writing these lines, but we’ll add more to our Store as we go… Here is what we have so far:
ABOUT THIS PRODUCT
Do It Yourself.
We couldn’t find a way to protect a shunt, so we made one.
This is an homemade product.
Each enclosure/cover is individually 3D printed, takes about an hour to complete, and requires manual labor. This is not a mass-produced product. This is a crafted, hand-made product.
Low Volume.
We created this product for our own needs, to make just a few units. There is no way for us to ramp up the production and lower the price, unless we take it to injection molding manufacturing but that’s a whole another level we’re not considering at the moment.
3 reviews for Victron SmartShunt Enclosure/Cover (Protective Case)
Victron SmartShunt Enclosure/Cover (Protective Case)
Still in the early stages of electrical-system development. But it fits fine and looks great. Very blue!
Appears well made, arrived a few days earlier than expected. Looking forward to checking how well it fits in about one month.
Great service – quality products.