Free US/CAN shipping on orders over $125 USD!

Victron 500A Shunt Enclosure / Cover

5.00 out of 5
(6 customer reviews)


This shunt enclosure/cover protects against accidental short circuit and physical damage. Designed specifically for the standard 500A/50mV Victron shunt (included with BMV-Series battery monitors with physical display) for a snug fit and optimal protection. Accepts wire of any gauge (AWG) and coming out from any side of the shunt.

Get US$3.75 discount if purchased in conjunction with the Builder's Package. log in to apply the discount or see the Builder's Package to learn more.
SKU: FOR004 Categories: , , , Tag:
Brand: FarOutRide
Victron Shunt Enclosure Cover (Front View No cover)
Before (without enclosure)
Victron Shunt Enclosure Cover (front view with cover)
After (with enclosure)
Victron Shunt Enclosure Cover (Rear View No Cover)
Before (without enclosure)
Victron Shunt Enclosure (rear view cover) (2)
After (with enclosure)



Remove the mounting screws and the wires/connectors from the shunt. Slide down the enclosure over the shunt:

Victron Shunt Enclosure Cover (Slide cover down to install)

Install the mounting screws and connect the wires to the shunt:

Victron Shunt Enclosure Cover (Install wire and connectors)


The cover uses friction-fit over the two M10 screws to stay in place:

Victron Shunt Enclosure (friction fit cover)

To install the cover, simply slide it over the two M10 screws:

Victron Shunt Enclosure (press cover into M10 screws to install)

Connect the RJ12 telephone cable, positive battery connection and auxiliary connection (as required):

Victron Shunt Enclosure (front view with wires no arrow)


This enclosure/cover is compatible with the following battery monitors:


  • Installed Dimensions: 4.75in x 1.78in x 2.0in (1120mm x 45mm x 50mm).
  • Manufacturing: 3D Printed.
  • Material: Polycarbonate.
  • Temperature Resistance: Up to 250F (120°C), exceeds marine wire insulation rating.
  • Included: Enclosure (base) and cover (top).
Victron Shunt Enclosure Cover (Outside Dimensions)


  • Ships From:  British Columbia, Canada.
  • Carrier: Canada Post / USPS.
  • Cost: Actual carrier shipping rate calculated at checkout. You can combine other items from our Store to save on shipping.

wARRANTY, rETURNs & Refund

Warranty: If there is an issue with your enclosure (manufacturing defect), we’ll be happy to send you another one free of charge! 🙂

Returns & Refund: If you ordered the wrong enclosure (please check “Compatibility” section above before ordering!) or changed your mind, we can make a refund providing the enclosure is not damaged (no scratches, no cosmetic wear). You are responsible of shipping the product back to us (including the shipping fees associated with it).

Inspiration & Idea

Exposed components (shunt, battery terminals, breakers, etc.) in our campervan make us feel a bit uncomfortable due to the risk of short circuit. Here’s why…


Before installing the electrical system in our new van conversion, we are slowly working on designing and making enclosures and covers for the components we plan to use:


It’s still a work in progress at the time of writing these lines, but we’ll add more to our Store as we go… Here is what we have so far:


Do It Yourself.

We couldn’t find a way to protect a shunt, so we made one.

This is an homemade product.

Each enclosure/cover is individually 3D printed, takes about an hour to complete, and requires manual labor. This is not a mass-produced product. This is a crafted, hand-made product.

Low Volume.

We created this product for our own needs, to make just a few units. There is no way for us to ramp up the production and lower the price, unless we take it to injection molding manufacturing but that’s a whole another level we’re not considering at the moment.

6 reviews for Victron 500A Shunt Enclosure / Cover

Based on 6 reviews
5 star
4 star
3 star
2 star
1 star
Showing 6 of 6 reviews (5 star). See all 6 reviews
1-6 of 6 reviews
  1. The covers fits absolutely perfect. Good job. Everybody that have shunts should get these to eliminate the chance of something coming in contact with the terminals.

  2. Thank you for a well-designed and well-made shunt cover. It fits perfectly. It’s remarkable what you are able to craft with 3-D printing!

  3. The cover arrived 4 days earlier than expected and it fit just perfect. Like the blue color this time. You guys are awesome!!!!

    • Thank you!! 🙂

  4. It’s a simple enough piece of kit. But it’s designed well and it fits.

  5. Excellent Product..Fast Shipping.. Great Communication

Add a review
You must be logged in to post a review Log In

Want More?


Stay in touch!


About us



Hello! We’re Isabelle and Antoine 🙂 In 2017, we sold our house (and everything in it), quit our engineering careers, and moved into our self-built campervan. Every day is an opportunity for a new adventure... We’re chasing our dreams, and hopefully it inspires others to do the same!

Heads Up: Exclusive Deals!

Thanks to all of you, we managed to negociate group discount on these. Strength in numbers!

Victron Shunt Enclosure Cover (Front View with Wires)
Victron 500A Shunt Enclosure / Cover